Find Gas Struts by Vehicle or Rego

STRUXA GAS STRUTS

Vehicle Gas Strut Finder - Australia

🚗 Find Your Fit
Scan your strut label, or search by Make / Model
1,800+ vehicle fitments · Fast Australia-wide shipping

New Zealand Owned & Operated

12 Month Fault Warranty

Fast Australia-Wide Shipping

OEM Quality Replacements

1,800+ Vehicle Fitments Covered

📏 Measure your existing gas strut fully extendedCentre of ball socket to centre of ball socket, in mm

A gas strut with arrows running from the centre of one ball socket to the centre of the other, labelled: measure centre to centre in mm, fully extended.

Take the strut off the vehicle, or open the panel so the strut is fully extended.
Measure from the centre of one ball socket to the centre of the other, in millimetres.
That number is the length to order. If your strut has a label or sticker with a code on it, use the Scan Label tab below instead - we read the length and force straight off it.

Length has to match before ordering. If yours sits between two sizes, measure again fully extended - a partly closed strut always reads short.

Rego lookup covers New Zealand plates only. In Australia, use Scan Label above with a photo of your old strut, or pick your make and model below.

Scan Your Strut

Camera, photo upload, or type the code - whatever's easiest

Your photo is sent to our AI to read the label text only, then discarded immediately. We never store images.

92277418
753410331 0180N
^ scan this

What to scan: the numbers printed or laser-etched on the strut tube. We need the part code and the N value (e.g. 0180N = 180 Newtons of force).

Tap Start Camera above, then Capture Photo once the label is in frame

Tap Capture Photo to scan the label

incl. GST

Add to Cart

Multiple Possible Matches

Build Your Custom Strut

That code isn't an exact catalogue match. Set the specs below from your old strut and we'll get you the right replacement - or send us a photo instead.

Installed length (mm)

Force (N)

Body / tube fitting Ball stud

Shaft fitting Ball stud

A ball stud is the 10mm ball-shaped pin bolted to the vehicle - the socket clips over it. Tick an end to have the stud supplied with that end (no extra cost).

Select your fittings to preview

Build it at your force

Need something else? Request a custom strut

Name

Email *

Sent! We'll be in touch within 1 business day to confirm your custom strut.

Manual lookup instead

Sent! We'll be in touch within 1 business day.

Select Model

Results

📷 Scan strut label to confirm match

🔒Privacy: Photos sent to AI to read label only, then immediately discarded.

Start camera or upload below

⬆ Upload

or type a code

✓ Match

Need Help Finding the Right Strut?

Send us your rego and a photo of your strut's label, that's the most crucial thing to get right.

Will not stay up	Needs more pressure
Too hard to close	Needs less pressure
Opens too far / not enough	Different length

Tell me when it is back

Your cart is empty

Your cart

Estimated total

Scan Your Strut

Build Your Custom Strut

Select Model

Results

Getting the old one off

Which way up

Putting the new one on

If it is not right

Need Help Finding the Right Strut?

Country/region